La TORQ22D es una pulidora de doble acción de última generación que combina la máxima comodidad con un rendimiento superior gracias a un tiro extra grande de 21 mm, una suavidad inigualable y una ergonomía centrada en el usuario.
Use esta pulidora para:
-Aborde rápidamente tareas de detalle a gran escala
-Cambie fácilmente entre placas de respaldo de 5 y 6 "
-Hacer frente a cualquier tarea de detalle
-Elimine fácilmente remolinos, rasguños y defectos.
-Alcance la potencia ideal a altas y bajas velocidades
Como Usar:
- Shake well and apply 4-5 drops of V36 to Orange Pad.
- Prime pad with Pad Conditioner.
- Dab product out evenly across 2' x 2' section.
- Turn on machine on surface to speed setting 1 to spread product.
- Increase speed to 5-6 and using moderate pressure.
- Work area in 2-3 passes until product becomes clear.
- Examine results. If you are satisfied with results, proceed to step 10.
- If you are not satisfied with results, try using V34 with the Orange Pad; if you are satisfied, proceed to step 10.
- If an even more aggressive approach is needed, switch to the Yellow Cutting Pad.
- Refine finish with white pad and V38 Final Polish.
- Work until optical clarity is achieved.
- Remove residue with clean microfiber towel.
How to Change Backing Plate:
- Unplug the TORQ 22D Random Orbital Polisher and turn the machine over and lay on a flat, stable surface.
- Counter-hold the backing plate attached to the machine, and unscrew the center hex-bolt with included TORQ Hex Key Tool.
- Replace with desired 22D Backing Plate. Line up backing plate fitment tab on spindle thread housing and insert hex-bolt.
- Line up backing plate fitment tab on spindle thread housing and insert hex-bolt.
- Counter-hold the newly-installed backing plate, then screw the center hex-bolt in with included TORQ Hex Key Tool.